Labtone Test Equipment Co., Ltd.!



Vibration Test System-Vertical with Horizontal

Name:Vibration Test System-Vertical with Horizontal


Working Principle of Vibration Shaker
The working principle of the electromagnetic vibration exciter is similar to a loudspeaker whereby electrical
conductor is moved by the action of electromagnetic force in the magnetic field. The force to accelerate the
moving part is generated by the balance between driving current and magnetic flux. Therefore, by
controlling the driving current, one can control the vibration generator.
The maximum acceleration level of the electromagnetic vibration exciter is determined by the maximum
current and the loading. At low frequency, displacement of moving part  is restricted such that the
acceleration will not reach high level. The resonance frequency of the moving element is set higher
than the upper limit of the frequency range.
The performance of vibration generator can be reflected by the chart that displays the maximum
acceleration under different frequencies. By using a log-log plot, the restriction of displacement
can be expressed by a straight line with slope of 6 dB/octave.

The general formula for calculating force vector of vibration systems:

Force(N) = Mass(kg) x Accelration( m/s² or g)     F=MA
Mass = Shaker Armature + device under test + fixture (vertical table/slip table with driver bar)

EV series of electromagnetic vibration testing system simulate the vibration environment under the laboratory condition, 

and test the impact strength as well as reliability of various vibration test applications. In the laboratory, with the aid of

 vibration testing system, simulations of reproduction of sinusoidal, random, resonant search and dwell, classical shock and

 road models, etc. can be achieved. It is essential for product quality assurance, new product research and development.


EV series of electromagnetic vibration testing system is specially designed to meet the need for long time operation. Vertical

 and horizontal vibrations can be achieved by the installation of vibration resistant base. The standard platform is equipped 

with high efficiency airbag shock isolation device, so that the vibration transmitted to the building can be minimized. There

 is no need for additional foundation in most of the cases.


A complete set of vibration testing system is composed of shaker, power amplifier and vibration measuring control system, 

in accordance with the relevant national and international standards (such as: MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, 

JIS, BS, etc.) to provide technical support for establishing product quality inspection.

1. Rugged suspension system and linear motion guiding, strong carrying capacity, good guiding functions, high stability.
2. Load center airbag with high static stiffness and low dynamic stiffness, strong carrying capacity, perfect performance
   on amplitude variation.
3. High efficiency D class power switching, 3-sigma peak current, low power consumption and minimum harmonic distortion.
4. Quick self-diagnosis with safety interlock, high safety reliability.
5. Airbag shock isolation device for vibration platform without the need of additional. foundation, perfect reproduction
    of vibrational wave and reduction in vibration transmittance.
6. Horizontal and vertical expansion platforms for different applications.
7. Simple controller operation.

Technical Specifications: (1.5-2 inches displacement)

Technical Specifications: (3-4 inches displacement)

  • Contact us
  • +86 0769-85370090          
  • 400-0755 532
  • servicetz1288

Pay attention to us